Vermont Storm Long Waterproof Riding Boots Guide
Vermont Storm boots are waterproof long riding boots for riders who want one tall leather boot for the saddle and practical use around the yard. Their 2 cm riding heel, full-length side zip, waterproof membrane and dual-grip outsole make them the riding-focused choice. Check foot, calf and height fit carefully before wearing them outdoors.
What are Vermont Storm boots designed for?
They are designed as waterproof long riding boots that can move between riding and everyday equestrian use. Both the brown and black styles are currently included in Bareback’s Riding Boots collection. They combine a waxed-leather upper with oiled-suede heel and toe details, a breathable lining through the leg and foot, and a Wil-Tex™ waterproof lining.
The waterproof gusset extends halfway up the zip, so the construction is intended to help protect against wet conditions while retaining the convenience of a full-length OPTI® side zip.
Vermont Storm boots for riding or yard work: what changes?
| Situation | Why Vermont Storm may suit it | What to check |
|---|---|---|
| Riding | 2 cm heel, long profile and dual-grip outsole | Stirrup compatibility, calf fit and freedom to flex at the ankle |
| General yard jobs | Waterproof lining, shock-absorbing midsole and supportive steel shank | Ground conditions and whether the job needs safety footwear |
| Wet turnout or gateways | Waxed leather and waterproof membrane help with wet-weather use | The waterproof gusset reaches halfway up the zip; avoid water entering above that point |
| All-day equestrian wear | Breathable lining and removable cushioned insole | Comfort, heel hold and pressure around the calf after walking |
| Competition or smarter riding wear | Tall, contoured leather shape in brown or black | Your discipline’s rules and preferred appearance |
How do Vermont Storm long riding boots fit?
The current product guidance marks both colours as true to size. Begin with your usual foot size, then check the full fit rather than relying on shoe size alone. Long riding boots also need to work at the calf, ankle and knee.
- Check foot length and width: your toes should have room without the foot sliding forwards.
- Check the instep and heel: the heel should feel held without uncomfortable pressure over the top of the foot.
- Check calf fit: fasten the full-length zip without forcing it or trapping clothing.
- Check height: bend your knee and sit in a riding position to make sure the top does not dig into the back of the knee.
- Test indoors: wear the breeches and socks you ride in and walk on a clean surface before outdoor use.
Use the Bareback fit guide for current measuring guidance. If your measurements sit between options, ask Bareback for fitting help before wearing the boots outside.
What makes Vermont Storm boots suitable for riding?
The 2 cm heel is listed as ideal for riding, while the dual-grip outsole is designed for grip and the shock-absorbing midsole adds support in and out of the saddle. A built-in steel shank supports stability through the arch. The sole still needs to work safely with your own stirrups, so check that it can enter and release freely before riding.
Can you wear Vermont Storm boots around the yard?
Yes, they can cover everyday equestrian tasks as well as riding. The waterproof lining and tall upper are useful in wet conditions, and the removable suede-effect cushioned insole lets you inspect or replace the footbed when needed. However, these are riding boots rather than protective safety boots. Choose task-specific footwear where toe protection or another safety rating is required.
How waterproof are Vermont Storm boots?
The live product specification lists an upgraded Wil-Tex™ waterproof lining with a gusset extending halfway up the zip. That construction helps keep feet dry in normal wet-weather use, but water can enter over the top of the boot or above the gusset. Deep water, prolonged saturation, damage and neglected leather can all reduce practical protection.
How should you care for waxed-leather Vermont Storm boots?
- Brush off dried mud with a suitable soft brush.
- Wipe the leather gently with a damp cloth rather than soaking the boot.
- Allow the boots to dry naturally away from radiators and direct heat.
- Use care products suitable for waxed leather and oiled suede, following the product instructions.
- Keep products away from the zip teeth and check the zip, sole and stitching regularly.
See Bareback’s boot care guide for current cleaning and protection guidance.
Which Vermont Storm colour should you choose?
Brown and black share the same published core specification, fit guidance and price. Choose the colour that works with your riding wardrobe, then make fit the deciding factor. The useful next step is to compare the live product photos and available sizes.
Shop Vermont Storm Waterproof Long Riding Boots in brown or view the black Vermont Storm boots. You can also compare the wider women’s riding boots collection, all current riding boots and waterproof boots.
Frequently asked questions
Are Vermont Storm boots waterproof?
Yes. The current product specification lists a Wil-Tex™ waterproof lining with a waterproof gusset extending halfway up the side zip.
Do Vermont Storm boots run true to size?
The current guidance describes both colours as true to size. Long-boot fit also depends on calf shape, height, instep and the socks or breeches worn.
Can Vermont Storm boots be used for riding?
Yes. They have a 2 cm heel listed as ideal for riding, together with a steel shank and dual-grip outsole. Always check compatibility with your own stirrups.
Can you use Vermont Storm boots for yard work?
They suit general equestrian and yard use where a waterproof long boot is appropriate, but they are not described as protective safety footwear.
Need help choosing the right boots?
Our friendly team can help with fit, calf width, instep and sizing. Give us a call or drop into the showroom.